Pull Cord EncodersAlso known asCable Pull EncoderThe formal name for these sensors is Tension Displacement Transducers. Civiti offers a wide range of communication signals forPull Cord Encoders, 4-20mA, 0-5V, 0-10V, 0-20mA, SSI, Parallel, RS485, MODBUS-RTU, Profibus-DP, CANopen, Profinet. All these signals are available.

The length of the pull cord can be customized as required and the encoder can be supplied as a matched set.

Regarding the precision, we provide domestic pull rope encoder, comparable to imported products, with high precision, which has good feedback in the alternative market and belongs to our important series of products. Moreover, this pull rope encoder is one of the most exported encoders, with good response in foreign markets. In the trend of domestic substitution of the encoder, can make foreign market share, can show that this is a very excellentCable Pull EncoderThe

A tie-wire encoder is a sensor for measuring linear displacement. It consists of a measuring element and a reading device. The measuring element is usually a long wire or tape which is fixed to the measuring object, e.g. a moving part of a machine. The reading device determines the position of the object by measuring the movement of the wire. This type of encoder can measure very large distances with great precision.

There are many different types of wire pull encoders, with the most common types being absolute and incremental. Absolute encoders can read the position of an object directly without the need for initial calibration. Incremental encoders, on the other hand, require calibration and can only determine the amount of change in an object's position relative to its initial position.

Encoder Customization

Customized communication for this encoder is relatively simple, just provide the communication signal and length requirements. We will customize the production according to these two requirements.